A dartboard is a small mounting project with unusually precise placement. Height and throwing distance affect use, while the wall needs to support the board or cabinet without creating an improvised attachment.
Choose the Wall Before Measuring
The wall should provide enough unobstructed space for the board, players, and the throwing line.
Doors, furniture, walkways, windows, and televisions can make an otherwise empty wall a poor location. The floor should also provide a practical place to establish the throwing distance.
Board vs Cabinet Installation
A bare dartboard may use a center mounting screw or bracket. A cabinet spreads the project across multiple mounting points and can add doors, scoreboards, lighting, or a backing panel.
The cabinet should be assembled and measured before mounting so the center of the actual board lands where intended.
Height and Throwing Distance
Different dart games can use different dimensions. If the homeowner wants a layout based on a specific published standard, that standard should be identified rather than assumed.
The wall-mount height and floor throwing line can then be marked from that standard.
Wall Attachment
The board or cabinet mounting method depends on the product, weight, and wall. Drywall, masonry, paneling, and a wall with accessible framing present different attachment options.
A heavy cabinet should not be mounted with hardware chosen only by convenience.
FAQ
Can a dartboard be installed over a protective backboard?
Yes, if the backboard and dartboard mounting systems are compatible.
What changes with a dartboard cabinet?
Cabinet assembly and mounting may be considered after the cabinet weight, wall, supplied hardware, and desired board position are reviewed.
Can the throwing line be marked?
It may be marked when the homeowner identifies the desired game standard and floor position. The work does not certify an official tournament layout.
Can it be mounted on masonry?
Potentially, but the wall material and appropriate fastener method need to be reviewed.
Send the board or cabinet model and a photo of the wall through the contact page.